Control Mode of Bag Making Machine
The reason why plastic bag making machine
can complete the bagging process efficiently and accurately is that
there are systematic control methods, and corresponding control methods
for different actions to ensure the accuracy and stability of the
operation. The specific ways are as follows:
Firstly, the discharging switch is opened, and the storage motor is
controlled by the storage photoelectricity to store the quantitative
materials. At the same time, when the heating control switch is turned
on, the hot knife can be heated through the thermostat to achieve the
temperature required for operation. Secondly, the stepper motor can
drive the action of raw materials. The white bag sealing machine
determines that the stepper motor stops at a fixed number of steps to
achieve fixed length control. The color bag sealing machine realizes
positioning control by detecting the corresponding signal of the
electric eye to stop the stepper motor. The effect is very good.
When the stepping motor stops running, the three-phase asynchronous
motor will also drive the hot knife to seal and cut. When the number of
bags is set, the bag-making machine can enter the whole bag-making
process, so that the whole bag-making process of the carry bag making machine
What points should we pay attention to in daily operation?
Points for attention in daily operation of bag making machine
1. Develop the good habit of checking the temperature self-control of
bag-making machine is intact, the heating apparatus is intact, and the
heating temperature of each point should be adjusted in time within the
scope of the index; if there are any abnormalities, it should be solved
2. Check the traction speed of bag making machine
and control the
thickness of film; ensure that no deviation is done in the production
process, and improve the quality as far as possible.
3. Observe whether the film thickness is uniform, whether the folding
diameter meets the standard, and whether the blowing width is deviated;
and adjust it appropriately.
4. Check and control the pressure of the air cylinder, not too high, but there should be standby pressure.
5. Maintain the raw material proportion and mix evenly, reject the
unbalanced operation of the proportion; check and classify the pure raw
material in production, so as not to affect the quality by the
6. Check whether there are impurities in the raw materials. When there
are metal foreign bodies mixed in, magnets should be used to absorb the
mixed materials in time. If necessary, stop the machine to check and
remove them at the first time in order to prevent damage to the machine
from affecting the operation.
7. Check the lubrication of the reducer and the cylinder of the air
compressor, and make sure that the lubrication oil is sufficient when
starting the carry bag making machine
8. Check the temperature rise and mechanical transmission of each motor
regularly. Suggestions that can record data well can provide help for
Cause Analysis of Rapid Development of Bag Making Machine
The carry bag making machine
is a kind of plastic packaging
machinery. At present, China's plastic packaging machinery industry has
become one of the fastest growing industries in many traditional
machinery manufacturing industries, with huge annual demand. Why is
China's plastic packaging machinery industry developing so rapidly? It
needs to be analyzed from the following points:
1. With the rapid development of plastic processing industry in China, there is a strong demand for plastic machinery.
2. There is a great demand for high-tech equipment in the market, which promotes the renewal of equipment.
The rapid development of China's plastic packaging machinery industry
makes it more conducive to the export and introduction of advanced
technology. China is a big producer of plastic machinery, but the total
export accounts for a very small part, which is very disproportionate.
At present, according to the production capacity and export potential of
China's plastic packaging machinery, efforts to promote export is one
of the directions of development. I believe that as long as we seize the
opportunity and create conditions, the development of plastic packaging
machinery will go further.