Home > News > Content
Slitting MachineType And Maintenance
Aug 29, 2017

Slitting machine is a wide range of paper or film cut into a number of narrow materials of mechanical equipment, commonly used in paper machinery and printing and packaging machinery. Its main feature is the magnetic powder clutch as a resistance device, through the system control, to output a DC voltage, control the magnetic clutch generated resistance. At the same time, its structural advantages also fill the gaps in the automatic pipe cutting machine technology.

The type of slitter is increasing and the classification method is different. In accordance with the requirements of the size of the paper can be divided into paper cutting machine and small paper cutting machine. According to the work of the cutting machine there are three, divided into flat knife cutting, extrusion cutting and round knife cutting. Flat knife cutting is like a razor, like the material in the process of running down to fall, so as to achieve the purpose of cutting. This is for the two, hanging slit is the material through the two rollers, the razor down the material will be cut longitudinally, this cutting method convenient tool, easy to operate. Groove Slitting When the material is running on the knife roll, the cutter falls in the slot of the sipe and the material is cut longitudinally. In the sub-casting PP film or side material narrow film, commonly used in this way, can improve the cutting efficiency. But relative to the floating slit, its drawback is that the knife is more inconvenient. Extrusion cutting is not common in the domestic slitter, it is mainly by the material and the speed of synchronization with the material has a certain angle of the end of the roller and adjust the air knife composition.


1, simple operation control panel: the Department of the Ministry of control, centralized panel operation.

2, three-stage length setting: advanced three-stage lookout count to ensure that the winding length is accurate.

3, automatic exchange axis: After the completion of coiling operation, the two-axis automatic exchange, easy operation, high efficiency.

4, labeling instructions: to reach the length of the label after the automatic shutdown, attached to the platform attached to the label of the label label paste.

5, after the feeding method: from the side of the operating surface feeding, with rubber wheel to reduce the tear tape stripping the noise, and smooth discharge.


Before the use of automatic cutting machine should be the main parts of the inspection, filling the oil; in the inspection of removable automatic cutting machine, the use of inappropriate tools, the use of unscientific methods of operation; every two weeks on the machine For a full cleaning and inspection; automatic cutting machine, such as a long time to stop without, must be all the bright surface wipe clean, coated with anti-rust oil, plastic cover will cover the whole machine cover. If the automatic cutting machine is disabled for more than 3 months, it should be covered with anti-rust oil. After the work is completed, clean the equipment carefully and wipe the exposed surface.

Routine maintenance to do a good job Slip the daily maintenance and maintenance work to do the following five points:

First, the electrical parts to regular cleaning and inspection, timely removal of hidden dangers.

Second, the use of slitter is by slitting machine, cross-cutting machine to complete, so, to use high-quality vertical knife and cross-cutting knife.

Third, the daily maintenance of the slitting machine to be in place, the standard is smooth, clean, clean (clean, no debris) in place to ensure that the sliding parts of the device in good condition.

Fourth, the maintenance work, the rotation of the site to stop regular and irregular inspection (especially for wearing parts to stop real-time monitoring). The implementation of regular adjustments, regular changes, commuters and do a careful record to extend the life of the equipment to achieve the purpose.

Fifth, to improve the technical quality and degree of operation of the slitter of the staff, on the control of the local operation to do the person as a person, without the promise of any person shall not operate on their own.

Subscribe to our email list
Sign up with your name and email to get the latest proway updates, exclusive access to promotions, sales events, pre-order sales & more!
Connect with Xinye
Become our fan, follow us & subscribe for the latest updates and deals
QR Code
  • About Us
  • Products
  • News
  • Exhibition
  • Contact Us
  • Feedback
  • Copyright © Ruian Xinye Packaging Machine Co.,Ltd All rights reserved.