Home > News > Content
Steam Recycling Machine Workflow And Recycling Method
Jul 13, 2017

  Steam Recycling Machine Workflow and Recycling Method

  To understand the energy saving of the steam recovery machine, it is necessary to understand how the steam recovery machine is working. Simply put, the steam recovery machine is a mechanical drive system to drive the compression system to run, the steam mixture discharged from the steam equipment directly pressurized, the pressure of the mixture to be higher than the boiler operation, so that the water and water mixture can be directly through the pipeline Was pressed into the boiler, so as to achieve the soft water, energy saving, fuel savings and other fundamental purposes.

  The steam recovery machine can be summarized as follows:

  Boiler - Steam equipment - Steam condensate mixture - Condensate recovery unit - Pressurized - Boiler.

  This can be summarized as a steam recovery machine energy-saving way: the steam in the heat has been recycled, saving intermediate links. This steam recovery machine installation flexibility: either directly installed in the trap or drainage pipe at the beginning, can also be arranged according to the steam equipment, installed in the ground. It should be noted that, as far as possible the equipment will be stable in a relatively flat place, reduce the equipment caused by the operation of equipment loss.

  The unique recovery method of the steam recovery machine makes its advantages very obvious:

  1, the condensate is the most pure distilled water, do not contain fouling and other solid components, if the recycling, can save a lot of Qingpu costs, water and other corresponding costs.

  2, to improve the boiler water quality, can improve the quality of steam, while reducing boiler emissions, saving energy loss, so that water treatment costs.

  3, to improve the water supply temperature, water oxygen content decreased, to avoid the boiler, heat and piping corrosion.

  4, improve the water supply temperature, reduce the temperature difference between the boiler air bag, reduce the thermal expansion and contraction of steel plate, the pressure balance, extend the boiler life.

  5, condensate recovery, can reduce the amount of water supply, so that the furnace and the furnace outside the water treatment costs greatly reduced. Water supply and the furnace temperature difference is small, the boiler feed water, the steam pressure and stability.

  6, to improve the boiler feed water temperature, a significant reduction in fuel consumption.


Subscribe to our email list
Sign up with your name and email to get the latest proway updates, exclusive access to promotions, sales events, pre-order sales & more!
Connect with Xinye
Become our fan, follow us & subscribe for the latest updates and deals
QR Code
  • About Us
  • Products
  • News
  • Exhibition
  • Contact Us
  • Feedback
  • Copyright © Ruian Xinye Packaging Machine Co.,Ltd All rights reserved.